Cost of Heating And Air Conditioning / HVAC In Wisconsin (2024 Prices)

Typical Cost To Install Central AC
Low
$4,070
Average
$4,920
High
$5,930
See costs in your area

Typical home size in Wisconsin is around 1820 sq. ft., and with average insulation (13R walls & 38R ceiling), you will need an HVAC system size of about 33000 BTUs / 3 TONs *.

Professional installation of a 14 SEER HVAC System in WI costs between $4,304 and $5,189, which includes labor & materials. A 14 HVAC system provides the best combination of price, value and ROI.

Your Central AC can be a single unit or (if over 5 TONs) a combination of multiple smaller units, & you can use a conventional Central AC or a Central Heat Pump.

Adjust your home size & electric cost, to see numbers tailored to you:
Home Size (s.f.)
Electric Cost ($)

The state of Wisconsin is located in Climate Region #1, which means it has cooler than average summer temperatures, compared with other 49 states.

Average summer daytime temperature in WI is around 81.9 °F, which requires an average size HVAC system for your home.

This guide is based around a Central HVAC system, which cannot be truly zoned (unlike Mini Splits).

How Much Does HVAC System Cost in Wisconsin?

Typical Cost To Install Central AC Average: $4,070 - $5,930
See costs in your area

HVAC Contractors in Wisconsin typically charge around $4,304 to $5,189 to install a 3 Ton standard efficiency 14 SEER Central AC, of which $2,709 is the cost of materials, excluding refrigerant (freon). A 14 SEER Central AC will consume roughly 2545 kWhs of electricity during a summer cooling season.

A more advanced 16 SEER Central AC (3 Ton), which usually has a 2-stage compressor and is more efficient. Installation cost of a 16 SEER HVAC unit in WI is around $5,432 to $6,548, with materials costing around $3,381.

16 SEER models are more efficient than 14 SEER, and should consume around 2263 kWhs of electricity for the season. A 16 SEER Air Conditioned may be either a conventional AC or a Heat Pump variant - the power consumption & efficiency will not change.

Costs Difference between WI urban areas, and the rest of the state:

Typically, you can expect to HVAC costs to be lower in smaller towns, and higher in urban areas. Largest cities in Wisconsin are:

- Milwaukee (population 594,833)
- Madison (population 269,840)
- Green Bay (population 105,139)
- Kenosha (population 100,164)

If you live in one of these larg(er) cities (Milwaukee, Madison, Green Bay, & Kenosha), your installations cost, is likely to be 3-5% higher than in the rest of the state, or $5,649 to $6,810 for a 16 SEER central AC.

In smaller towns, you can expect about 2-3% discount, or $5,269 to $6,351 for the same for a 16 SEER unit.

Typical Cost of a 16 SEER Central AC in WI Average: $5,430 - $6,540
See costs in your area

High Efficiency Central Air Unit Cost (18+ SEER)

The most efficient models of Central AC start at 18 SEER, and are almost always a Heat Pump variant. A 3 Ton Central Air unit installation will cost around $8,017 to $9,664 in Wisconsin, and it will consume 2044 kWhs of power during a summer cooling season.

If you are a resident of Milwaukee, Madison, Green Bay, or Kenosha, you can expect to pay a slight premium for an 18 SEER system, and your cost will be around $8,338 to $10,051.

Finally, 20+ SEER central air conditioners are always Heat Pumps, are fairly rare due to their very high relative cost, and long ROI. A 3 ton Central AC / Heat Pump with 20 SEER rating will usually cost $10,311 to $12,429.

However, higher end models (specifically Lennox Heat Pumps) but can run as high as $15,120 for a Lennon XP20 Heat Pump, and upward of $19,940 for Lennox SL25XPV (25 Seer) Heat Pump, which can also heat in temperatures as low as -13 °F.

Fun HVAC Fact: Lennox has a "sister brand" - Armstrong, which in most cases is has identical HVAC systems, with same specs and warranty, but priced 20-30% less than Lennox. Essentially by installing Armstrong HVAC system you get a Lennox for much less.

20 SEER AC / Heat Pumps will use around 1868 kWhs of electricity, making it 57% more efficient than a 14 SEER HVAC unit, and 114% more efficient than older 9 SEER AC.

These 20 SEER heat pumps are them some of the most efficient, commercially available residential HVAC systems! However, the upfront cost makes them not the best value.

Typical Cost of a 18 SEER Central AC in WI Average: $8,010 - $9,660
See costs in your area

How local climate affects size of your AC, and electrical costs:

Summers temperatures in WI (which is located in Climate Zone 1) average 81.9 °F, are generally cool, and require shorter AC run times, of about 9.3 hours per day. Your estimated cost of running your AC is around $379/year, for a 16 SEER system. See Climate Zone/Region map below:

For most homeowners in WI, a 14 SEER Central HVAC unit will be the best balance of price and energy efficiency, and yield an average ROI of 15 years, when upgrading from an old 9 SEER HVAC system. Let's take a deeper look and energy savings and ROI in the next section, and hou you can reduce your energy costs.

Below we will look at different SEER ratings, and cost savings, which you can expect by upgrading your HVAC system, as well as ROI, or how long your new Central Air unit will take to pay for itself in energy savings in Wisconsin.

Which Central AC in WI is best for you (upfront cost & ROI)?

In regards to cooling your home, an old 9 SEER AC will do the same job as the most modern 24 SEER heat pump. The main differnece is in mow much it will cost you to run your AC. There is of course some small "comfort" differences, where 24 SEER ac runs smoothly, and 9 SEER unit will have on/off cycles, but they both provide equal amount of cooling.

For example, a 9 SEER would cost $670 to run for a year, vs $269 to run a 24 SEER heat pump. That's a difference of $401 per year!

The electric rate in Wisconsin is $0.168 / kWh ( 0% higher than than national average of $0.167/kWh ).

Cost of electricity in WI is rising by about 2.49 % / year over last 10 years, and by year 2034, is expected to go up, to around $0.21/kWh ($545/year for a 14 SEER AC), based on historic electricity inflation in Wisconsin.

Projected electric cost inflation in WI over next 10 years (cost to run 9-20 SEER AC)


Assuming you already have a 14 SEER AC, your total energy usage for Cooling will be around 2545 kWhs , you can expect to pay around $426 / year to cool your home.

If you have a 9 SEER HVAC system, you are currently paying around $670 / year. and power usage close to 4001 kWhs

Our "Price-Value-ROI Model" shows that for a 1820 sq. ft. home in WI, a 14 SEER HVAC system, which uses 36% less power than a 9 SEER unit, and offers the best price / value / ROI ratio.

Thus, upgrading from 9 SEER to 14 SEER system, it will pay for itself in 15 years.

Wisconsin HVAC Prices, Energy Costs & 10 year ROI: 9 vs 14/16/18/20 SEER

9 SEER 14 SEER 16 SEER 18 SEER 20 SEER
Installation Cost - $4,670 $5,900 $8,710 $11,200
Electric Usage / Yr 4001 kWhs 2545 kWhs 2263 kWhs 2044 kWhs 1868 kWhs
Electric Cost / Yr $670 $426 $379 $342 $313
Energy Savings / Yr - $244 $291 $328 $357
ROI (With Inflation) - 15 years 15.9 years 20.8 years 24.5 years
10 Year Savings
(With Inflation)
- $-1,558 $-2,182 $-4,520 $-6,641

See table above for comparison of ROI, Annual Energy Savings and Cost of Electricity. Best price/value unit is marked in green.

What is SEER Rating, and How it Affects AC Efficiency?

SEER, which stands for Seasonal Energy Efficiency Rating is a measuremnt of how much electricity your AC will use to cool your house. SEER can be caluclated as follows:

SEER = BTUs / WATTs

The higher the SEER rating, the less electricity your AC will use.

BTUs is the cooling capacity of your AC, which can also be represented in 'TONs'. 1 TON = 12000 BTUs. A typical central AC size is 36000 BTUs or 3 Tons.

If you know your AC's Cooling capacity and the SEER rating, you can calculate approximately how much power it will draw at 100% load. Here is the formula:

BTUs / SEER = WATTs

So if we take our average sized 3 Ton AC (36000 BTUs), with 14 SEER rating we can caluclate it's power draw.

WATTs = 36000 / 14 = 2250 WATTs (2.25 kW)

From this simple formula, you can see that at max load, your 3 Ton AC will use about 2250 Watts or 2.25 kW.

Note: this number is only for the AC compressor. Total power will be slightly higher, becuase you also have the blower motor that pushes cool air through the ducts. The blower motor on modern AC will use about 300 watts when running at full speed. Therefore total power draw for a 3 Ton 16 SEER AC will be around 2.55 kW.

Here is an HVAC sizing table, based on home size and your Climate Zone (WI is in Zone #1):

AC Size ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5
1.5 Ton 700-1100 s.f. 700-1050 s.f. 500-1000 s.f. 500-950 s.f. 500-900 s.f.
2 Ton 1101-1400 s.f. 1051-1350 s.f. 1001-1300 s.f. 951-1250 s.f. 901-1200 s.f.
2.5 Ton 1401-1650 s.f. 1351-1500 s.f. 1301-1500 s.f. 1251-1550 s.f. 1201-1500 s.f.
3 Ton 1651-2100 s.f. 1601-2000 s.f. 1601-1900 s.f. 1501-1850 s.f. 1501-1800 s.f.
3.5 Ton 2101-2300 s.f. 2001-2250 s.f. 1901-2200 s.f. 1851-2150 s.f. 1801-2100 s.f.
4 Ton 2301-2700 s.f. 2251-2700 s.f. 2201-2500 s.f. 2151-2500 s.f. 2101-2400 s.f.
5 Ton 2701-3300 s.f. 2751-3300 s.f. 2601-3200 s.f. 2501-3100 s.f. 2401-3000 s.f.

Note: sizes in the table above are for information only. When installing new HVAC system, we recommend that your HVAC Contractor do a Manual J heat load calulation, to size your HVAC system properly.

How much electricity will my AC use per month?

This will depend on where you live (local temperatures) and your usage patterns. Basically you take power draw, and multiply it by avearge number of hours per day, that your AC runs.

In Wisconsin, the AC runs an average of 9.3 hours per day. Multiply it by 30 days, and your will get approximate Kilo Watt Hours (kWh) per months. In our case it will be 711 kWhs. And to go a little further, at current electic rate of $0.1675 / kWh, it will cost approxymately $119 / month, to cool your home with a 3 Ton HVAC system.

Typical Cost of a 14 SEER Central AC in WI Average: $4,300 - $5,180
See costs in your area

Benefits of Upgrading Your Old Central AC from 9 to 16 SEER:

If your Central AC is 15-20+ years old, most likely you have a 9 SEER system, which means you spend about $670 per year for cooling.

This is $291 (77%) more expensive compared to same size, but a a more efficient 16 SEER HVAC system.

If you upgrade your old 9 SEER to a 16 SEER HVAC or Heat Pump, your annual cooling cost will go down to an estimated $379 / yr.

Finally, your new HVAC system should pay for itself in 15 years with just energy savings (adjusted for inflation).

Assuming the cost of electricity will continue to increase by 2.49% / year, by the year 2034, your annual electric bill for cooling is expected to be $485/yr.

If you upgrade your old 9 Seer system to a new 16 Seer system, over next 10 years, your total savings will be close to $3,722 in energy costs (less $5,900 form the installation)!

Typical Cost of a 14 SEER Central AC in WI Average: $4,300 - $5,180
See costs in your area

If you have an older AC it makes sense to upgrade your AC system to a higher SEER (more efficient) Central AC unit such as 14 or even 16 SEER, if your house is around 2000 sq. ft.

For larger homes (3000 sq. ft and up), in Climate Zone 4 & 5, where electric costs are above $0.20 / kWh, it may advisable to upgrade even to an 18 SEER unit, as extra energy savings, will reduce your ROI period.

If you upgrade from 9 SEER to 16 SEER, the cost will be around $5,904 as your ROI or payback will be 20.3 years.

However, if currently you have a 14 SEER AC, it does not make financial sense to upgrade your AC system to a higher SEER (more efficient) Central AC unit such as 18 SEER, as the price difference is $4,036, and your ROI or payback will be 37.6 years, adjusted for inflation and 2.49% annual increase in cost of electricity in WI.

Installing New HVAC in Wisconsin - which SEER Rating to choose?

Typical Cost of a 14 SEER Central AC in WI Average: $4,300 - $5,180
See costs in your area

As you can see in the costs / value table below, in most cases, over a 10 year period, a 16 SEER HVAC system will provide the best value for the price in Wisconsin.

This table compares 4 different models of 33000 Btu HVAC systems - 14, 16, 18 and 20 SEER. The base line is 14 SEER model, and more efficient units are compared to it based on initial cost, energy savings in the 1st year, as well as 10 year energy saving, and total ROI period.

Both are adjusted for electric cost inflation (2.49%) in Wisconsin for a , compounded over last 10 years (we expect the same electric rate increases going forward, as that is the best we have).

Wisconsin HVAC Prices, Energy Costs & 10 year ROI: 14 vs 16/18/20 SEER

14 SEER 16 SEER 18 SEER 20 SEER
Installation Cost $4,670 $5,900 $8,710 $11,200
Electric Usage / Yr 2545 kWhs 2263 kWhs 2044 kWhs 1868 kWhs
Electric Cost / Yr $426 $379 $342 $313
Energy Savings / Yr - $47 $84 $113
ROI (With Inflation) - 20.4 years 37.6 years 45.2 years
10 Year Savings
(With Inflation)
- $-624 $-2,962 $-5,083

As you can see 14 SEER offers the best value for the money in WI, and upgrading to higher SEER will not lead to any additional savings.

* HVAC System Sizing & Pricing Our numbers are for general information only. When installing a new HVAC system, we recommend that you or your HVAC Contractor always perform a Manual J heat load calculation as well as ductwork suitability assessment, specific to your home. HVAC Prices prices, energy costs and savings are provided for reference only, are based on many factors, and may change at any time.

Typical Cost of a 16 SEER Central AC in WI Average: $5,430 - $6,540
See costs in your area


About Ilan

Ilan G. has been working in the remodeling and construction industry for over 15 years. His focus is on construction planning and design, as well as project cost estimating. Ilan also has a personal interest in interior design, as well as in unique DIY remodeling projects. Learn more about Ilan


See more about Remodeling Calculator team here


Leave a Reply

Your email address will not be published. Required fields are marked *