2023 Allura Fiber Cement Siding Prices And Installation

Allura fiber cement siding is a great option for your house, as it is very durable and comes in many different designs, styles and colors.

On average, installing Allura siding costs $4.50-6 per square foot. For a 2,000 sq.ft. simple ranch style house putting up Allura siding will run $9,000 – 12,000 including professional labor and materials.

If you are ready to replace your old siding, contact your local sing pros for FREE ESTIMATES!

How Much Does Allura Siding Cost?

Allura siding costs $4.20-4.75 per square foot. for a simple install. Higher-end Allura siding designs and more complex labor can increase the overall cost to $6.5-7.85 per square foot.

Materials prices for Allura siding vary greatly, depending on whether you want simple horizontal plank siding or more upscale looking shake/shingle siding, that replicated the look of cedar shake.

If you are not sure whether Allura siding is right for your house, check out other top quality siding materials options, some of which may be cheaper than Allura.

You can use our Siding Cost Calculator to estimate siding replacement prices for different siding materials, including fiber cement.

Cost To Install Allura Siding

Keep in mind that the cost of professional labor to install Allura siding depends on a number of factors and can vary significantly from the price estimates your may see online.

These factors include the following:

1. Location: if you live in a high-income city or town, siding contractors in your area can easily charge 20-30% more for their work than the national average price estimates for a siding install.

2. Size of your house: obviously the bigger your home, the more it will cost to put up siding. However, a very small house will actually cost more then expected per square foot, because the contractor has to include the cost of prep and clean up in a small job, which is the same as for a large job.

3. Architectural complexity of your home: the more corners, windows, doors and other architectural details your house has, the more expensive it will be to replace siding.

4. Number of stories: one storie homes are much cheaper to re-side that two or three storie houses.

5. Additional repairs: any unexpected house structural repairs, rot, mold that may need to be done once the old siding is removed and problems are discovered, can cost $1,000-4,000 extra.

Allura Siding Cost Per Square Foot

Allura siding cost ranges from $1.55 per square foot for horizontal planks to $5.65 per square foot for shakes.

At the low-end of the price spectrum Allura siding costs almost as little as good quality vinyl siding.

While on the higher end of the price spectrum, Allura siding is comparable in cost to top siding brands such as LP, James Hardie, and Nichiha.

See the chart below for Allura siding cost estimates per square foot.

	Allura Planks and Panels	Allura Shingles and Shakes	Allura Soffits, Trim and Accessories
Price Per Sq.Ft.	$1.55-$2.75	$3.50-$5.65	$2.45 – $3.85

Allura Siding Installation Cost on a 2,000 Square Foot House

Here are some sample estimates for the cost of installing Allura siding on a 2,000 sq.ft. house based on the architectural complexity and structure of the home.

Single Story, 4 Corners, Planks Used in Gables: Price range $17,000 – 21,000

Single Story, 6 Corners, Shingles Used in Gables: Price range $19,000 – 23,000

Two Story, 4 Corners, Shingles Used in Gables: Price Range $20,000 – 24,000

Two Story or Multi Story, 6 Corners, Shingles Used in Gables: Price Range $ 22,000 – 28,000

Allura Siding Options: Lap Siding, Vertical Panels and Shake Siding

Here is a brief overview of the various siding products manufactured by Allura.

Allura Lap Siding

Allura Lap Siding is available in 3 styles: Traditional Lap, Smooth Lap and 7” Perfection Shingles.

Traditional Lap siding has a deep, wood-grain look and texture, while the Smooth Lap siding is a completely smooth board with a modern aesthetic.

All boards come in 12’ lengths and six width options of 5-1/4”, 6-1/4”, 7-1/4”, 8-1/4”, 9-1/4” and 12”. The 7” Perfection Shingles are also available in 12’ lengths and are 7” wide with a design and texture embedded to make them look like wood shingles without having to put up thousands of individual shingles.

All three Lap Siding styles are available in 25 colors. Traditional Lap and the 7” Perfection Shingles are also available in 5 stain finishes.

Vertical Panel Siding

Allura’s Vertical Panel Siding is available in four styles: Traditional 8” Groove Panel; Traditional Vertical Panel; Smooth Vertical Panel and Stucco Vertical Panel.

They are all primed and sealed and available in 25 paint colors. All come in 3 panel sizes, 4’x8’, 4’x9’ and 4’x10’ to create the design that best suits your home and your taste.

Traditional 8” Groove Panels are milled with a cut-away edge on both sides of the panel forming a V-shaped groove where the tongue and groove joints come together.

V-groove planks in varying widths were a common wall cladding in Colonial-era homes. Allura 8” Groove Panels have an updated design with consistent width sizes and varying lengths that have the look and texture of grooved, cedar boards.

Traditional Vertical Panels offer a seamless panel with the look of cedar. Smooth Vertical panels let you create a very contemporary look and Stucco Vertical panels give you the look and texture of stucco.

Shake Siding

Shakes and shingles siding is the most high-end and expensive product that Allura manufactures. It does a stellar job replicating the beautiful look and feel of real cedar wood shingles without the associated maintenance and other issues.

Allura Shake Siding comes in 6 variations:

-8-inch Individual Shakes
-Half Rounds
-Octagons
-7-inch Shake Select
-7-inch Straight Edge Shakes which come in panels of 16”x48″
-5-inch Straight Edge Shakes on panels that measure 12”x48”

These are all available in 25 colors and 5 stain options. Rounds are sometimes called “fish scales” and are historically accurate detailing on gable ends, dormers and other architectural features.

The Half-Round shapes overlap with a 7” inch exposure and have a cedar, wood-grain look. Octagons are also a historically accurate shingle shape, overlapping with a 7” exposure.

They are not a symmetrical shape but more elongated with a cedar, wood-grain look. The 7” Shake Select, the 7” Straight Edge and the 5” Straight Edge have the look of individual staggered width cedar shingles.

The 7” and 5” measurements refer to how much of the shingle design is exposed below the shingle above it. The 7” Shake Select is has a staggered edge and the 7” and the 5” Straight Edge have an even edge.

The 8-inch Individual Shakes are for those who love the look of traditional cedar shakes. They come in easy-to-install panels that look like 8-inch wide, individual shakes with either a straight edge or a staggered edge appearance. The panels come primed and ready for the paint color of your choice.

How Durable Is Allura Siding?

Color limitations, vulnerability to moisture and ocean air exposure and complicated installation can all be remedied with fiber cement siding.

Fiber cement siding is not only beautiful but impressively strong and versatile. It is well-equipped to stand up to the intense wind gusts common during hurricane season and easily outperforms other siding options in severe weather conditions.

Allura’s advanced formula makes for a more durable finish. It is specially formulated to provide superior protection against the elements, including hail. It is also resistant to cold, heat, insects and fire.

Each piece of Allura siding is sealed for maximum resistance to inclement weather and exterior impact. The sealant actually penetrates the boards and bonds with the fiber cement material.

The durability of Allura’s baked-on factory finish is guaranteed for 15 years and which is 3 times longer than you can expect on a typical on-site paint job to last.

That’s in addition to the 50-year warranty on the actual fiber cement panels.

Does Allura Fiber Cement Siding Contain Asbestos?

No. Allura’s fiber cement is not made with asbestos. It is made from a blend of cellulose fiber mixed with sand, silica, and Portland cement. Many builders mistake modern fiber cement siding products with the crude experimental versions that were common when it was first introduced decades ago.

While some of the original versions did contain asbestos, the fiber cement products that are produced today have been significantly reworked and formulated with much safer products.

Is Allura Siding Hurricane Resistant?

Homeowners who haven’t equipped their homes with hurricane-resistant siding hold their breath from June to November, known as the Atlantic hurricane season in the U.S. Hurricanes are fed by incredibly strong winds, which often carry the brunt of their force and cause the most damage.

High winds and intense wind gusts can lift the roof off of a home, strip the exterior siding and even demolish the foundational structure and support beams underneath. Your home is a place of comfort, refuge and protection.

Remodeling or rebuilding a home altogether following a severe weather event can be overwhelming emotionally, physically and financially. Getting your home outfitted with hurricane-resistant siding can save an abundance of time, money and stress.

Hurricanes bring torrential downpours and fiercely strong winds that can topple and tear down buildings. These items are lifted and tossed far distances, sometimes even several miles, before landing.

Not only is this damage devastating for the homeowner, but it can also be quite dangerous for the surrounding community. Siding panels, beams and other building materials can essentially become missiles when picked up and propelled by hurricane-level winds.

Determining the best siding for high wind areas requires evaluating the quality of the construction and the materials. Some materials are simply weaker and more susceptible to stripping, breaking and flying off the home when strong wind gusts hit.

The best siding for strong wind areas is fiber cement, by far. Durable, tough, and well-equipped to stand up to the intense wind gusts common during hurricane season, fiber cement siding easily outperforms other siding options in severe weather conditions.

There is also soffit, backerboard and trim options crafted with fiber cement in addition to shakes and panels. This means your whole home can be outfitted with hurricane-resistant features.

Allura vs Wood Siding

Fiber cement can be made with a deeply stamped wood-grain appearance and texture so that once it is installed it looks like wood siding.

For a homeowner, this means you can get the traditional look of a wood-sided home without the expense and the issues that come with wood.

One of those issues is moisture. Wood can absorb moisture and swell, shrink and crack over time. If it is exposed to enough moisture, it can also begin to rot.

Wood siding has to be scraped and painted every few years to protect it and to keep your house looking good.

Fiber cement, on the other hand, performs well in nearly all climates. It is impact and moisture-resistant, does not attract insects and is flame retardant.

The planks, panels or shingles are heavy and durable but fairly easy to install for professionals, going up similarly to wood siding. The finish lasts for years longer than wood so there isn’t the same level of upkeep required.

In terms of cost, Allura is certainly the cheaper option. Wood siding costs an average of $7 to $10 per square foot, while fiber cement has costs that start well under $5 per square foot.

Allura Siding vs Vinyl

Vinyl siding is supposed to be a low-maintenance alternative to wood. It doesn’t require painting, and resists moisture and insects. However, it is not very durable.

It is so lightweight that high winds can easily tear it off of a home. In cold weather it can become brittle and crack with impact, and in hot climates, the vinyl can soften, melt and warp. Vinyl siding does not look as close to wood as most people would want.

It has very visible plastic seams and limited colors and styles.

Fiber cement can be installed anywhere as it naturally resists heat, cold and high wind speeds. It comes in a wide range of textures, styles and sizes.

Low quality vinyl siding is typically about $1-2 per square foot cheaper than fiber cement. However, when you consider higher quality vinyl siding brands, their prices are very similar to Allura.

Allura vs Aluminum Siding

Metal siding is another lower maintenance alternative to wood. It is most commonly made from steel or aluminum. Both are available in either a simulated wood-grain finish or a smooth finish and come in different styles including lap siding and Board-and-Batten.

Steel is more durable than wood alternatives but if the finish is scratched the metal underneath it can rust. Aluminum siding doesn’t corrode, but it is very lightweight and can have issues with denting.

Allura fiber cement resists corrosion and is impact resistant so it won’t dent the way aluminum does. Metal siding costs between $5 and $10 per square foot, while Allura starts at about $4 per square foot.

Allura vs Stucco Siding

Stucco also uses cement as a base for a durable product that is resistant to rot, moisture and impact. It can be smooth or textured and works well in areas with high moisture content in the air, such as the Southern United States.

Stucco’s biggest drawback is the installation. You need a highly qualified professional to install it. Since each type of stucco is unique, the contractor who can install the smooth variety may not know how to apply rock dash or pebble dash siding.

It also has a tendency to crack when the house settles, which means repairs not only to the area of damage but also repainting the entire structure to ensure the repair matches.

Allura comes in a wide range of architectural panels that can give the appearance of stucco without the installation drawbacks or the worries about cracking as the house settles.

With Allura fiber cement panels, you get to enjoy the unique beauty of stucco combined with enhanced strength and durability of fiber cement.

Stucco is more expensive with costs starting around $8 per square foot for a basic stucco siding.

Advantages of Allura Fiber Cement Siding

Compared to its competitors among top siding manufacturers Allura boasts a number of attractive advantages:

Superior Durability: Allura siding is resistant to hail, high winds, temperature fluctuations (cold and heat), insects, rot, fire.

Color Fast Finish: you don’t have to worry that your Allura siding will fade over time, as many other siding products, especially vinyl tend to do. Allura’s proprietary baked on factory finishes are guaranteed to last for 15 years, keeping your house looking brand new.

Wide Range of Siding Design Options: Allura fiber cement siding comes in architectural panels, lap siding, board-and-batten siding, cedar-look shingles and decorative shingles.

Allura makes it possible to get the look and curb appeal of expensive siding materials such as stucco and natural wood without the associated costs, repairs and maintenance issues.

Moreover, the wide range of Allura’s siding types and design options can match nearly any architectural style from traditional to contemporary. Most of these products are available in a range of 25 pre-painted factory-applied colors which resist peeling and chipping.

If you are debating what color to choose for your news siding, check out our comprehensive guide on the Best Exterior Siding Colors for Your House.

Thickness: Allura siding boasts extra thickness with boards 5/16 or .3125 inches

Factory Primed Boards: if you want to paint your siding, Allura offers many factory primed options, which are ready to be painted.

Low maintenance: no one wants to spend their free time constantly caring for their house siding. With Allura you can forget about tedious and costly upkeep and clean your siding once or twice a year.

Top Warranty: Allura offers an industry-leading 50-year warranty of their fiber cement products and a 15-year ColorMax Paint warranty on pre-painted siding.

High ROI: you can expect to see returns in the ballpark of 82-85% when you resell a home with Allura siding. This means that if you spend $18,000 on Allura fiber cement siding, your home’s resale value will increase by $14,760 to $15,300 with an 82% to 85% ROI.